Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

access-class

Restrict incoming connections to a particular IP address in a defined IP access control list (ACL).

Syntax

access-class access-list-name

To delete a setting, use the no access-class command.

Parameters

access-list-name

Enter the name of an established IP Standard ACL.

Defaults

Not configured.

Command Modes

LINE

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Related Commands

line — applies an authentication method list to the designated terminal lines.

ip access-list standard — names (or selects) a standard access list to filter based on the IP address.

ip access-list extended — names (or selects) an extended access list based on the IP addresses or protocols.