Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

advertise dot3-tlv

Advertise dot3 TLVs (Type, Length, Value).

Syntax

advertise dot3-tlv {max-frame-size}

To remove advertised dot3-tlv, use the no advertise dot3-tlv {max-frame-size} command.

Parameters

max-frame-size

Enter the keywords max-frame-size to advertise the dot3 maximum frame size.

Defaults

none

Command Modes

CONFIGURATION (conf-lldp) and INTERFACE (conf-if- interface-lldp)

Supported Modes

Programmable-Mux (PMUX)

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
9.2(0.0)	Introduced on the M I/O Aggregator.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.