Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show config

Display the current configuration of the selected VLAN.

Syntax

show config

Command Modes

INTERFACE VLAN

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Example

Dell(conf-if-vl-100)#show config
                                             !
                                             interface Vlan 1
                                             description a
                                             no ip address
                                             mtu 2500
                                             shutdown
                                             Dell(conf-if-vl-100)#