Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

dot1x supplicant-timeout

Configure the amount of time after which exchanges with the supplicant time-out.

Syntax

dot1x supplicant-timeout seconds

To return to the default, use the no dot1x supplicant-timeout command.

Parameters

seconds

Enter a time-out value in seconds. The range is from 1 to 300, where 300 is implementation dependant. The default is 30.

Defaults

30 seconds

Command Modes

INTERFACE

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.