Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

ipv6 ospf area

Enable IPv6 OSPF on an interface.

Syntax

ipv6 ospf process id area area id

To disable OSPFv6 routing for an interface, use the no ipv6 ospf process-id area area-id command.

Parameters

process-id	Enter the process identification number.
area area-id	Specify the OSPF area. The range is from 0 to 65535.

Defaults

none

Command Modes

INTERFACE

Supported Modes

Full—Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.