Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

Obtaining Help

As soon as you are in a command mode there are several ways to access help.

To obtain a list of keywords at any command mode:	Type a `?` at the prompt or after a keyword. There must always be a space before the `?`.
To obtain a list of keywords with a brief functional description:	Type `help` at the prompt.
To obtain a list of available options:	Type a keyword and then type a space and a `?`.
To obtain a list of partial keywords using a partial keyword:	Type a partial keyword and then type a `?`.
Example	The following is an example of typing `ip ?` at the prompt: Dell(conf)#ip ? igmp Internet Group Management Protocol route Establish static routes telnet Specify telnet options

When entering commands, you can take advantage of the following timesaving features:

The commands are not case-sensitive.
You can enter partial (truncated) command keywords. For example, you can enter int tengig int for the interface tengigabitethernet interface command.
To complete keywords in commands, use the TAB key.
To display the last enabled command, use the up Arrow key.
To erase the previous character, use either the Backspace key or Delete key.
To navigate left or right in the Dell Networking OS command line, use the left and right Arrow keys.

The shortcut key combinations at the Dell Networking OS command line are as follows:

Key Combination	Action
CNTL-A	Moves the cursor to the beginning of the command line.
CNTL-B	Moves the cursor back one character.
CNTL-D	Deletes the character at the cursor.
CNTL-E	Moves the cursor to the end of the line.
CNTL-F	Moves the cursor forward one character.
CNTL-I	Completes a keyword.
CNTL-K	Deletes all the characters from the cursor to the end of the command line.
CNTL-L	Re-enters the previous command.
CNTL-N	Returns to the more recent commands in the history buffer after recalling commands with Ctrl-P or the up Arrow key.
CNTL-P	Recalls commands, beginning with the last command.
CNTL-U	Deletes the line.
CNTL-W	Deletes the previous word.
CNTL-X	Deletes the line.
CNTL-Z	Comes back to EXEC mode from any CONFIGURATION mode.
Esc B	Moves the cursor back one word.
Esc F	Moves the cursor forward one word.
Esc D	Deletes all the characters from the cursor to the end of the word.