Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

release dhcp interface

Release the dynamically-acquired IP address on an Ethernet interface while retaining the DHCP client configuration on the interface.

Syntax

release dhcp interface type slot/ port

Parameters

interface type slot/port

For the management interface on the stack-unit, enter the keyword management ethernet followed by slot/port information. The slot and port range is 0.
For a VLAN, enter the keyword vlan followed by a number from 1 to 4094.

Command Modes

EXEC Privilege

Supported Modes

All Modes

Default

None

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
9.2(0.0)	Supported on the M I/O Aggregator.

Usage Information

When you enter the release dhcp command, although the IP address that was dynamically-acquired from a DHCP server is released from an interface, the ability to acquire a new DHCP server-assigned address remains in the running configuration for the interface. To acquire a new IP address, enter either the renew dhcp command at the EXEC privilege level or the ip address dhcp command at the interface configuration level.