Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

clear gvrp statistics

Clear GVRP statistics on an interface.

Syntax

clear gvrp statistics {interface interface | summary}

Parameters

interface interface	Enter the following keywords and slot/port or number information: For a Port Channel interface, enter the keywords `port-channel` then a number. The range is from 1 to 128. For a 10-Gigabit Ethernet interface, enter the keyword `TenGigabitEthernet` then the slot/port information.
summary	Enter the keyword `summary` to display just a summary of the GVRP statistics.

Defaults

none

Command Modes

EXEC
EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

Invalid messages/attributes skipped can occur in the following cases:

The incoming GVRP PDU has an incorrect length.
“End of PDU” was reached before the complete attribute could be parsed.
The Attribute Type of the attribute that was being parsed was not the GVRP VID Attribute Type (0x01).
The attribute that was being parsed had an invalid attribute length.
The attribute that was being parsed had an invalid GARP event.
The attribute that was being parsed had an invalid VLAN ID. The valid range is 1 - 4095.

A failed registration can occur for the following reasons:

Join requests were received on a port that was blocked from learning dynamic VLANs (GVRP Blocking state).
An entry for a new GVRP VLAN could not be created in the GVRP database.

Example

Dell#show gvrp statistics int tengig 1/0
                                             
                                             Join Empty Received: 0
                                             Join In Received: 0
                                             Empty Received: 0
                                             LeaveIn Received: 0
                                             Leave Empty Received: 0
                                             Leave All Received: 40
                                             Join Empty Transmitted: 156
                                             Join In Transmitted: 0
                                             Empty Transmitted: 0
                                             Leave In Transmitted: 0
                                             Leave Empty Transmitted: 0
                                             Leave All Transmitted: 41
                                             Invalid Messages/Attributes skipped: 0
                                             Failed Registrations: 0
                                             Dell#

Related Commands

show gvrp — displays the GVRP configuration.