Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

monitor interface

Monitor counters on a single interface or all interfaces on a line card. The screen is refreshed every five seconds and the CLI prompt disappears.

Syntax monitor interface [ interface]

To disable monitoring and return to the CLI prompt, press the q key.

Parameters
interface (OPTIONAL) Enter the following keywords and slot/port or number information:
  • For the management port, enter the keyword managementethernet then the slot (0 or 1) and the port (0).
  • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information.
Command Modes
  • EXEC
  • EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information In the Example, the delta column displays changes since the last screen refresh.

The following are the monitor command menu options.

Key Description
systest-3 Displays the host name assigned to the system.
monitor time Displays the amount of time since the monitor interface command was entered.
time Displays the amount of time the chassis is up (since last reboot).
m Change the view from a single interface to all interfaces on the line card or visa-versa.
c Refresh the view.
b Change the counters displayed from Packets on the interface to Bytes.
r Change the [delta] column from change in the number of packets/bytes in the last interval to rate per second.
l Change the view to the next interface on the line card, or if in line card mode, the next line card in the chassis.
a Change the view to the previous interface on the line card, or if in line card mode, the previous line card in the chassis.
T Increase the screen refresh rate.
t Decrease the screen refresh rate.
q Return to the CLI prompt.
Example (Single Interface)
systest-3 Monitor time: 00:00:06 Refresh Intvl.: 2s Time: 03:26:26
                                             
                                             Interface: Te 0/3, Enabled, Link is Up, Linespeed is 1000 Mbit
                                             
                                             Traffic statistics:    Current    Rate     Delta
                                             Input bytes:    9069828  43 Bps     86
                                             Output bytes:  606915800  43 Bps     86
                                             Input packets:      54001   0 pps      1
                                             Output packets:    9401589   0 pps      1
                                             64B packets:         67   0 pps      0
                                             Over 64B packets:      49166   0 pps      1
                                             Over 127B packets:        350   0 pps      0
                                             Over 255B packets:       1351   0 pps      0
                                             Over 511B packets:        286   0 pps      0
                                             Over 1023B packets:       2781   0 pps      0
                                             Error statistics:
                                             Input underruns:          0   0 pps      0
                                             Input giants:          0   0 pps      0
                                             Input throttles:          0   0 pps      0
                                             Input CRC:          0   0 pps      0
                                             Input IP checksum:          0   0 pps      0
                                             Input overrun:          0   0 pps      0
                                             Output underruns:          0   0 pps      0
                                             Output throttles:          0   0 pps      0
                                             
                                             m - Change mode                c - Clear screen
                                             l - Page up                    a - Page down
                                             T - Increase refresh interval  t - Decrease refresh interval
                                             q - Quit
                                          

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\