Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

ip mroute

Assign a static mroute.

Syntax

ip mroute destination mask { ip-address | null 0| {{bgp| ospf} process-id | isis | rip | static} { ip-address | tag | null 0}} [distance]

To delete a specific static mroute, use the ip mroute destination mask { ip-address | null 0| {{bgp| ospf} process-id | isis | rip | static} { ip-address | tag | null 0}} [distance] command.

To delete all mroutes matching a certain mroute, use the no ip mroute destination mask command.

Parameters

destination	Enter the IP address in dotted decimal format of the destination device.
mask	Enter the mask in slash prefix formation ( /x ) or in dotted decimal format.
null 0	(OPTIONAL) Enter the keyword `null` then zero (0).
[ protocol [ process-id \| tag] ip-address]	(OPTIONAL) Enter one of the routing protocols: Enter the BGP as-number then the IP address in dotted decimal format of the reverse path forwarding (RPF) neighbor. The range is from 1 to 65535. Enter the OSPF process identification number then the IP address in dotted decimal format of the RPF neighbor. the range is from 1 to 65535. Enter the IS-IS alphanumeric tag string then the IP address in dotted decimal format of the RPF neighbor. Enter the RIP IP address in dotted decimal format of the RPF neighbor.
static ip-address	(OPTIONAL) Enter the Static IP address in dotted decimal format of the RPF neighbor.
ip-address	(OPTIONAL) Enter the IP address in dotted decimal format of the RPF neighbor.
distance	(OPTIONAL) Enter a number as the distance metric assigned to the mroute. The range is from 0 to 255.

Defaults

Not configured.

Command Modes

CONFIGURATION

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Related Commands

show ip mroute — views the multicast routing table.