Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

debug fip-snooping

Enable the debug FIP protocol specific messages.

Syntax

debug fip-snooping [all | acl | error | ifm | info | ipc | rx { packet-type { all | discovery | virtual-link-instantiation | virtual-link-maintenance | vlan-discovery } { port-channel | tengigabitethernet } } | tx ]

Parameters

all	Enable all the debug options.
acl	Enable for ACL specific debugs.
error	Enable for Error specific debugs.
ifm	Enable for IFM specific debugs.
info	Enable for Information specific debugs.
ipc	Enable for IPC specific debugs.
rx	Enable for packet receive specific debugs.
packet-type	Specify the packet type. Options are: all discovery virtual-link-instantiation virtual-link-maintenance vlan-discovery
all	Enable for all the packet types.
discovery	Enable for FIP discovery solicits (enodes) and adverts (fcf).
virtual-link-instantiation	Enable for flogi, fdisc and flogo packets.
virtual-link-maintenance	Enable for clear virtual link and keepalive packets.
vlan-discovery	Enable for FIP VLAN requests and notifications.
port-channel	Port-channel interface.
tengigabitethernet	TenGigabit Ethernet interface.
tx	Enable for packet transmit specific debugs.

Command Modes

EXEC Privilege

Supported Modes

All Modes

Command History

Version	Description
9.4(0.0)	Supported on the FN I/O Aggregator.