Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show ip ospf database asbr-summary

Display information about autonomous system (AS) boundary LSAs.

Syntax

show ip ospf process-id database asbr-summary [ link-state-id] [adv-router ip-address]

Parameters

process-id	Enter the OSPF Process ID to show a specific process. If no Process ID is entered, command applies only to the first OSPF process.
link-state-id	(OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends on the LSA type, and it can be one of the following: the network’s IP address for Type 3 LSAs or Type 5 LSAs the router’s OSPF router ID for Type 1 LSAs or Type 4 LSAs the default destination (0.0.0.0) for Type 5 LSAs
adv-router ip-address	(OPTIONAL) Enter the keywords `adv-router` and the ip-address to display only the LSA information about that router.

Command Modes

EXEC
EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

The following describes the show ip ospf database asbr-summary command shown in the following example.

Field	Description
LS Age	Displays the LSA’s age.
Options	Displays the optional capabilities available on router. The following options can be found in this item: TOS-capability or No TOS-capability is displayed depending on whether the router can support Type of Service. DC or No DC is displayed depending on whether the originating router can support OSPF over demand circuits. E or No E is displayed on whether the originating router can accept AS External LSAs.
LS Type	Displays the LSA’s type.
Link State ID	Displays the Link State ID.
Advertising Router	Identifies the advertising router’s ID.
Checksum	Displays the Fletcher checksum of the LSA’s complete contents.
Length	Displays the length in bytes of the LSA.
Network Mask	Displays the network mask implemented on the area.
TOS	Displays the Type of Service (TOS) options. Option 0 is the only option.
Metric	Displays the LSA metric.

Example

Dell#show ip ospf 100 database asbr-summary
                                             
                                             OSPF Router with ID (1.1.1.10) (Process ID 100)
                                             
                                             Summary Asbr (Area 0.0.0.0)
                                             
                                             LS age: 1437
                                             Options: (No TOS-capability, No DC, E)
                                             LS type: Summary Asbr
                                             Link State ID: 103.1.50.1
                                             Advertising Router: 1.1.1.10
                                             LS Seq Number: 0x8000000f
                                             Checksum: 0x8221
                                             Length: 28
                                             Network Mask: /0
                                             TOS: 0 Metric: 2
                                             
                                             LS age: 473
                                             Options: (No TOS-capability, No DC, E)
                                             LS type: Summary Asbr
                                             Link State ID: 104.1.50.1
                                             Advertising Router: 1.1.1.10
                                             LS Seq Number: 0x80000010
                                             Checksum: 0x4198
                                             Length: 28
                                             --More--

Related Commands

show ip ospf database — displays OSPF database information.