Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show cam-acl-egress

Display the details of the FP groups allocated for the egress ACL.

Syntax

show cam-acl-egress

Defaults

none

Command Modes

Configuration

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

The display reflects the settings implemented with the cam-acl-egress command.

Example

Dell#show cam-acl-egress
                                             
                                             -- Chassis Egress Cam ACL --
                                             Current Settings(in block sizes)
                                             L2Acl     :       1
                                             Ipv4Acl   :       1
                                             Ipv6Acl   :       2
                                             
                                             -- Stack unit 0 --
                                             Current Settings(in block sizes)
                                             L2Acl     :       1
                                             Ipv4Acl   :       1
                                             Ipv6Acl   :       2
                                             
                                             Dell#