Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

banner exec

Configure a message that is displayed when your enter EXEC mode.

Syntax

banner exec c line c

Parameters

c	Enter the keywords `banner exec`, then enter a character delineator, represented here by the letter c. Press ENTER.
line	Enter a text string for your banner message ending the message with your delineator. In the following example, the delineator is a percent character (%); the banner message is “testing, testing”.

Defaults

No banner is displayed.

Command Modes

CONFIGURATION

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

Optionally, use the banner exec command to create a text string that displays when you accesses EXEC mode. The exec-banner command toggles that display.

Example

Dell(conf)#banner exec ?
                                             LINE         c banner-text(max length 255) c, where 'c' is a delimiting
                                             character
                                             
                                             Dell(conf)#banner exec %
                                             Enter TEXT message. End with the character '%'.
                                             This is the banner%
                                             Dell(conf)#end
                                             Dell#exit
                                             4d21h5m: %STKUNIT0-M P:CP %SEC-5-LOGOUT: Exec session is terminated for user on
                                             line console
                                             
                                             This is the banner
                                             
                                             Dell Force10 con0 now available
                                             
                                             Press RETURN to get started.
                                             
                                             This is the banner

Related Commands

banner login — sets a banner for login connections to the system.

banner motd — sets a Message of the Day banner.

exec-banner — Enables the display of a text string when you enter EXEC mode.

line — enables and configures the console and virtual terminal lines to the system.