Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

ipv6 pim spt-threshold

Specifies when a PIM leaf router should join the shortest path tree.

Syntax

ipv6 pim spt-threshold { kbps | infinity}

To return to the default value, use the no ipv6 pim spt-threshold command.

Parameters

kbps	Enter a traffic rate in kilobytes per second. The range is from 0 to 4294967 kbps. The default is 10 kbps.
infinity	Enter the keyword `infinity` to have all sources for the specified group use the shared tree and never join shortest path tree (SPT).

Defaults

10 kbps

Command Modes

CONFIGURATION

Supported Modes

Full—Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

PIM leaf routers join the shortest path tree immediately after the first packet arrives from a new source.