Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show iscsi sessions detailed

Displays detailed information on active iSCSI sessions on the switch.

Syntax

show iscsi sessions detailed [session isid]

Parameters

isid

Enter the session’s iSCSi ID to display detailed information on specified iSCSi session.

Command Modes

EXEC
EXEC Privilege

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
8.3.17.0	Supported on the M I/O Aggregator.

Example

Dell# show iscsi sessions detailed
                                             Session 0 :
                                             -----------------------------------------------
                                             Target:iqn.2010-11.com.ixia:ixload:iscsi-TG1
                                             Initiator:iqn.2010-11.com.ixia.ixload:initiator-iscsi-2c
                                             Up Time:00:00:01:28(DD:HH:MM:SS)
                                             Time for aging out:00:00:09:34(DD:HH:MM:SS)
                                             ISID:806978696102
                                             Initiator  Initiator  Target     Target  Connection
                                             IP Address TCP Port   IP Address TCPPort ID
                                             10.10.0.44 33345     .10.0.101   3260    0
                                             Session 1 :
                                             -----------------------------------------------
                                             Target:iqn.2010-11.com.ixia:ixload:iscsi-TG1
                                             Initiator:iqn.2010-11.com.ixia.ixload:initiator-iscsi-35
                                             Up Time:00:00:01:22(DD:HH:MM:SS)
                                             Time for aging out:00:00:09:31(DD:HH:MM:SS)
                                             ISID:806978696102
                                             Initiator Initiator Target Target Connection
                                             IP Address TCP Port IP Address TCPPort ID
                                             10.10.0.53 33432 10.10.0.101 3260 0

Related Commands

show iscsi — displays the currently configured iSCSI settings.
show iscsi sessions — displays information on active iSCSI sessions on the switch that have been established since the last reload.