Zu den Hauptinhalten

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

bridge-priority

Set the bridge priority for RSTP.

Syntax

bridge-priority priority-value

To return to the default value, use the no bridge-priority command.

Parameters

priority-value

Enter a number as the bridge priority value in increments of 4096. The range is from 0 to 61440. The default is 32768.

Defaults

32768

Command Modes

CONFIGURATION RSTP (conf-rstp)

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Related Commands

protocol spanning-tree rstp — enters rapid spanning tree mode.