Zu den Hauptinhalten

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

load-balance hg

Choose the traffic flow parameters the hash calculation uses while distributing the traffic across internal higig links.

Syntax

[no] load-balance hg { ip-selection | ipv6-selection [ source-ip | source-ipv6 | source-port-id | source-module-id | dest-ip | dest-ipv6 | dest-port-id | dest-module-id | protocol | vlan | L4-source-port | L4-dest-port ] | mac [ source-mac | source-port-id | source-module-id | dest-mac | dest-port-id | dest-module-id | vlan | ethertype | source-dest-mac ] | tunnel [ ipv4-over-ipv4 | ipv4-over-gre-ipv4 | mac-in-mac]}

Parameters

ip-selection \| ipv6-selection [ source-ip \| source-ipv6 \| source-port-id \| source-module-id \| dest-ip \| dest-ipv6 \| dest-port-id \| dest-module-id \| protocol \| vlan \| L4-source-port \| L4-dest-port ]	To use IPv4 key fields in hash computation, enter the keyword ip-selection then one of the parameters. To use IPv6 key fields in hash computation, enter the keyword ipv6-selection then one of the parameters. `source-ip` — Use IPv4 src-ip field in hash calculation. `source-ipv6` — Use IPv6 src-ip field in hash calculation `source-port-id` — Use src-port-id field in hash calculation. `source-module-id` — Use src-module-id field in hash calculation. `dest-ip` — Use IPv4 dest-ip field in hash calculation `dest-ipv6` — Use IPv6 dest-ip field in hash calculation `dest-port-id` — Use dest-port-id field in hash calculation. `dest-module-id` — Use dest-module-id field in hash calculation. `protocol` — Use IPv4 protocol field in hash calculation. `vlan` — Use vlan field in hash calculation. `L4-source-port` — Use IPv4 L4-source-port field in hash calculation. `L4-dest-port` — Use IPv4 L4-dest-port field in hash calculation.
mac [ source-mac \| source-port-id \| source-module-id \| dest-mac \| dest-port-id \| dest-module-id \| vlan \| ethertype \| source-dest-mac ]	To use MAC key fields in hash computation, enter the keyword mac then one of the parameters: `source-mac` — Use source-mac field in hash calculation. `source-port-id` — Use src-port-id field in hash calculation. `source-module-id` — Use src-module-id field in hash calculation. `dest-mac` — Use dest-mac field in hash calculation. `dest-port-id` — Use dest-port-id field in hash calculation. `dest-module-id` — Use dest-module-id field in hash calculation. `vlan` — Use vlan field in hash calculation . `ethertype` — Use Ethertype field in hash calculation. `source-dest-mac` — Use SMAC and DMAC fields in hash calculation.
tunnel [ ipv4-over-ipv4 \| ipv4-over-gre-ipv4 \| mac-in-mac ]	To use tunnel key fields in hash computation, enter the keyword tunnel then one of the parameters: `ipv4-over-ipv4` — Use ipv4-over-ipv4 field in hash calculation. `ipv4-over-gre-ipv4` — Use ipv4-over-gre-ipv4 field in hash calculation. `mac-in-mac` — Use mac-in-mac field in hash calculation.

Defaults

IP selection 5-tuples (source-ip dest-ip vlan protocol L4-source-port L4-dest-port).

Command Modes

CONFIGURATION

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.