Zu den Hauptinhalten

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

mode

To receive or transmit, set LLDP.

Syntax

mode {tx | rx}

To return to the default, use the no mode {tx | rx} command.

Parameters

tx	Enter the keyword `tx` to set the mode to transmit.
rx	Enter the keyword `rx` to set the mode to receive.

Defaults

Both transmit and receive.

Command Modes

CONFIGURATION (conf-lldp) and INTERFACE (conf-if- interface-lldp)

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the M I/O Aggregator.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Related Commands

protocol lldp (Configuration) — enables LLDP globally.

show lldp neighbors — displays the LLDP neighbors.