Zu den Hauptinhalten

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

login statistics

Enable and configure user login statistics on console and virtual terminal lines.

Syntax

login statistics {enable | time-period days}

no login statistics {enable | time-period days}

Parameters

enable	Enables user login statistics. By default, the system displays the login statistics for the last 30 days.
time-period days	Sets the number of days for which the system stores the user login statistics. The range is from 1 to 30.

Defaults

Not configured

Command Modes

CONFIGURATION

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.8(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

Only the system and security administrators can configure login activity tracking and view the login activity details of other users.

If you enable user login statistics, the system displays the last successful login details of the current user and the details of any failed login attempts by others.

If you use the login statistics time-period days command to set a custom time period, the system only reports the login statistics during that interval.

NOTE: Login statistics is not applicable for login sessions that do not use user names for authentication. For example, the system does not report login activity for a telnet session that prompts only a password field.

Example

When you login to the system, it displays a message similar to the following:

$ telnet 10.11.178.14
                                             Trying 10.11.178.14...
                                             Connected to 10.11.178.14.
                                             Escape character is '^]'.
                                             Login: admin
                                             Password:
                                             Last successful login: Mon Feb 16 04:36:11 2015 Line vty0 ( 10.14.1.97 ).
                                             There were 2 unsuccessful login attempt(s) since the last successful login.
                                             There were 3 unsuccessful login attempt(s) for user admin in last 30 day(s).

The preceding message shows that the user had previously logged in to the system using the VTY line from 10.14.1.97. It also displays the number of unsuccessful login attempts since the last login and the number of unsuccessful login attempts in the last 30 days.

$ telnet 10.11.178.14
                                             Trying 10.11.178.14...
                                             Connected to 10.11.178.14.
                                             Escape character is '^]'.
                                             Login: admin
                                             Password:
                                             Last successful login: Wed Feb 5 14:05:28 IST 2015 on console
                                             There were 2 unsuccessful login attempt(s) since the last successful login.
                                             There were 3 unsuccessful login attempt(s) for user admin in last 12 day(s).

The preceding message shows that the user had previously logged in to the system using the console line. It also displays the number of unsuccessful login attempts since the last login and the number of unsuccessful login attempts during a custom time period.

Related Commands

login concurrent-session — Configures the limit of concurrent sessions for all users on console and virtual terminal lines.

show login statistics — Displays login statistics of users who have used the console or virtual terminal lines to log in to the system.