Zu den Hauptinhalten

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

ip pim ingress-interface-map

When the Dell Networking system is the RP, statically map potential incoming interfaces to (*,G) entries to create a lossless multicast forwarding environment.

Syntax

ip pim ingress-interface-map std-access-list

Parameters

std-access-list

Enter the name of a standard access list.

Defaults

none

Command Modes

INTERFACE

Supported Modes

Full—Swtich

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Example

Dell(conf)# ip access-list standard map1
                                             Dell(config-std-nacl)# permit 224.0.0.1/24
                                             Dell(config-std-nacl)#exit
                                             Dell(conf)#int te 0/1
                                             Dell(config-if-te-0/1)# ip pim ingress-interface-map map1