Zu den Hauptinhalten

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show ipv6 neighbors

Display IPv6 discovery information. Entering the command without options shows all the IPv6 neighbor addresses stored on the control processor (CP).

Syntax

show ipv6 neighbors [vrf vrf-name] [ ipv6-address| interface interface]

Parameters

vrf vrf-name	(OPTIONAL) Enter the keyword vrf followed by the name of the VRF to display the neighbors corresponding to that VRF. NOTE: If you do not specify this option, neighbors corresponding to the default VRF are displayed.
ipv6-address	Enter the IPv6 address of the neighbor in the x:x:x:x::x format. NOTE: The :: notation specifies successive hexadecimal fields of zero.
interface interface	Enter the keyword `interface` then the interface type and slot/port or number information: For a Fast Ethernet interface, enter the keyword `fastEthernet` then the slot/port information. For a 10-Gigabit Ethernet interface, enter the keyword `TenGigabitEthernet` then the slot/port information. For a VLAN, enter the keyword `vlan` then the VLAN ID. The range is from 1 to 4094.

Defaults

none

Command Modes

EXEC
EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Example

Dell#   show ipv6 neighbors
                                             IPv6 Address Expires(min)Hardware Address State Interface VLAN CPU
                                             ------------------------------------------------------------------
                                             100::1        0.03       00:00:00:00:00:22 DELAY Te 1/12  -    CP
                                             fe80::200:ff:fe00:22 232 00:00:00:00:00:22 STALE Te 1/12  -    CP
                                             500::1        0.60       00:01:e8:17:5c:af REACH Te 1/13  -    CP
                                             fe80::200:ff:fe00:17 232 00:00:00:00:00:29 REACH Te 1/14  -    CP
                                             900::1       0.60        00:01:e8:17:5c:b1 STALE Po 23    -    CP
                                             400::1       0.60        00:01:e8:17:5c:ae REACH Te 1/2 Vl 100 CP
                                             Dell#