Zu den Hauptinhalten

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

username

Establish an authentication system based on user names.

Syntax

username name [nopassword | {password | secret} [ encryption-type] password] [ privilege level]

If you do not want a specific user to enter a password, use the nopassword option.

To delete authentication for a user, use the no username name command.

Parameters

name	Enter a text string for the name of the user up to 63 characters.
nopassword	Enter the keyword `nopassword` to specify that the user should not enter a password.
password	Enter the keyword `password` followed by the `encryption-type` or the password.
secret	Enter the keyword `secret` followed by the `encryption-type` or the password.
encryption-type	Enter an encryption type for the `password` that you enter. `0` directs Dell Networking OS to store the password as clear text. It is the default encryption type when using the `password` option. `7` to indicate that a password encrypted using a DES hashing algorithm follows. This encryption type is available with the `password` option only. `5` to indicate that a password encrypted using an MD5 hashing algorithm follow. This encryption type is available with the `secret` option only, and is the default encryption type for this option.
password	Enter a string up to 32 characters long.
privilege level	Enter the keyword `privilege` then a number from zero (0) to 15.
secret	Enter the keyword `secret` then the encryption type.

Defaults

The default encryption type for the password option is 0. The default encryption type for the secret option is 0.

Command Modes

CONFIGURATION

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.

Usage Information

To view the defined user names, use the show running-config user command.

Related Commands

service password-encryption — specifies a password for users on terminal lines.

show running-config — views the current configuration.