Zu den Hauptinhalten

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show fc switch

Display the switch configuration for Fibre Channel capability.

Syntax

show fc switch

Parameters

None

Command Modes

EXEC
EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.7(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.
9.0(1.3)	Introduced on the S5000.

Usage Information

The following table describes the show fc switch output shown in the following example.

Switch Mode	Fibre Channel mode of operation of an FN IOM switch.
Switch WWN	Factory-assigned worldwide node (WWN) name of the MXL. The MXL WWN name is not user-configurable.

Example

Dell(conf)#do show  fc switch 
                                             Switch Mode : FPORT
                                             Switch WWN  : 10:00:aa:00:00:00:00:ac
                                             Dell(conf)#