Zu den Hauptinhalten

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

capture bgp-pdu neighbor (ipv6)

Enable capture of an IPv6 BGP neighbor packet.

Syntax

capture bgp-pdu neighbor ipv6-address direction {both | rx | tx}

To disable capture of the IPv6 BGP neighbor packet, use the no capture bgp-pdu neighbor ipv6-address command.

Parameters

ipv6-address	Enter the IPv6 address of the target BGP neighbor.
direction {both \| rx \| tx}	Enter the keyword `direction` and a direction — either `rx` for inbound, `tx` for outbound, or both.

Defaults

Not configured.

Command Modes

EXEC
EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Related Commands

capture bgp-pdu max-buffer-size — enables route reflection between the route reflector and the clients.

show capture bgp-pdu neighbor — configures a route reflector and clients.