Zu den Hauptinhalten

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show cam mac stack-unit

Display the content addressable memory (CAM) size and the portions allocated for MAC addresses and for MAC ACLs.

Syntax

show cam mac stack-unit unit_number port-set port-pipe count [vlan vlan-id] [interface interface]

Parameters

stack-unit unit_number	(REQUIRED) Enter the keyword `stack-unit` followed by a stack member number to select the stack unit for which to gather information. The range is 0 to 5.
port-set port-pipe	(REQUIRED) Enter the keywords `port-set` followed by a Port-Pipe number to select the Port-Pipe for which to gather information. The range is 0.
address mac-addr	(OPTIONAL) Enter the keyword `address` followed by a MAC address in the nn:nn:nn:nn:nn:nn format to display information on that MAC address.
dynamic	(OPTIONAL) Enter the keyword `dynamic` to display only those MAC addresses learned dynamically by the switch.
static	(OPTIONAL) Enter the keyword `static` to display only those MAC address specifically configured on the switch.
interface interface	(OPTIONAL) Enter the keyword `interface` followed by the interface type, slot and port information: For a 10-Gigabit Ethernet interface, enter the keyword `TenGigabitEthernet` followed by the slot/port information.
vlan vlan-id	(OPTIONAL) Enter the keyword `vlan` followed by the VLAN ID to display the MAC address assigned to the VLAN. The range is from 1 to 4094.

Command Modes

EXEC
EXEC Privilege

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
8.3.17.0	Supported on the M I/O Aggregator.