Zu den Hauptinhalten

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

debug lldp interface

Enable LLDP debugging to display timer events, neighbor additions or deletions, and other information about incoming and outgoing packets.

Syntax

debug lldp interface { interface | all}{events | packet {brief | detail} {tx | rx | both}}

To disable debugging, use the no debug lldp interface { interface | all}{events} {packet {brief | detail} {tx | rx | both}} command.

Parameters

interface	Enter the following keywords and slot/port or number information: For a 10-Gigabit Ethernet interface, enter the keyword `tenGigabitEthernet` followed by the slot/port information.
all	(OPTIONAL) Enter the keyword `all` to display information on all interfaces.
events	(OPTIONAL) Enter the keyword `events` to display major events such as timer events.
packet	(OPTIONAL) Enter the keyword `packet` to display information regarding packets coming in or going out.
brief	(OPTIONAL) Enter the keyword `brief` to display brief packet information.
detail	(OPTIONAL) Enter the keyword `detail` to display detailed packet information.
tx	(OPTIONAL) Enter the keyword `tx` to display transmit-only packet information.
rx	(OPTIONAL) Enter the keyword `rx` to display receive-only packet information.
both	(OPTIONAL) Enter the keyword `both` to display both receive and transmit packet information.

Defaults

none

Command Modes

EXEC Privilege

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.