Zu den Hauptinhalten

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show snmp

Display the status of SNMP network elements.

Syntax

show snmp

Command Modes

EXEC
EXEC Privilege

Supported Modes

Full–Switch Mode

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Example

Dell#show snmp
                                             32685 SNMP packets input
                                             0 Bad SNMP version errors
                                             0 Unknown community name
                                             0 Illegal operation for community name supplied
                                             0 Encoding errors
                                             96988 Number of requested variables
                                             0 Number of altered variables
                                             31681 Get-request PDUs
                                             968 Get-next PDUs
                                             0 Set-request PDUs
                                             61727 SNMP packets output
                                             0 Too big errors (Maximum packet size 1500)
                                             9 No such name errors
                                             0 Bad values errors
                                             0 General errors
                                             32649 Response PDUs
                                             29078 Trap PDUs
                                             Dell#

Related Commands

snmp-server community — enables the SNMP and set community string.