Zu den Hauptinhalten

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show logging driverlog stack-unit

Display the driver log for the specified stack member.

Syntax

show logging driverlog stack-unit unit#

Parameters

stack-unit unit#

Enter the keywords stack-unit then the stack member ID of the switch for which you want to display the driver log. The range is from 0 to 1.

defaults

none

Command Modes

EXEC
EXEC Privilege

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module..

Usage Information

This command displays internal software driver information, which may be useful during troubleshooting switch initialization errors, such as a downed Port-Pipe.