Zu den Hauptinhalten

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

distance ospf

Configure an OSPF distance metric for different types of routes.

Syntax

distance ospf [external dist3] [inter-area dist2] [intra-area dist1]

To delete these settings, use the no distance ospf command.

Parameters

external dist3	(OPTIONAL) Enter the keyword `external` then a number to specify a distance for external type 5 and 7 routes. The range is from 1 to 255. The default is 110.
inter-area dist2	(OPTIONAL) Enter the keywords `inter-area` then a number to specify a distance metric for routes between areas. The range is from 1 to 255. The default is 110.
intra-area dist1	(OPTIONAL) Enter the keywords `intra-area` then a number to specify a distance metric for all routes within an area. The range is from 1 to 255. The default is 110.

Defaults

external dist3 = 110
inter-area dist2 = 110
intra-area dist1 = 110

Command Modes

ROUTER OSPF

Supported Modes

Full—Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

To specify a distance for routes learned from other routing domains, use the redistribute command.