Zu den Hauptinhalten

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

ip ssh rsa-authentication (EXEC)

Add keys for the RSA authentication.

Syntax

ip ssh rsa-authentication {my-authorized-keys WORD}

To delete the authorized keys, use the no ip ssh rsa-authentication {my-authorized-keys} command.

Parameters

my-authorized-keys WORD

Enter the keywords my-authorized-keys then the filename of the RSA authorized-keys.

Defaults

none

Command Modes

EXEC

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

If you want to log in without being prompted for a password, log in through RSA authentication. To do that, first add the SSHv2 RSA public keys to the list of authorized keys. This command adds the specified RSA keys to the following file: flash://ADMIN_DIR/ssh/authorized-keys-username (where username is the user associated with this terminal).

NOTE: The no form of this command deletes the file flash://ADMIN_DIR/ssh/ authorized-keys-username file.

Related Commands

show ip ssh rsa-authentication — displays the RSA authorized keys.

ip ssh rsa-authentication (Config) — enables RSA authentication.