Zu den Hauptinhalten

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

spanning-tree msti

Configure multiple spanning tree instance cost and priority for an interface.

Syntax

spanning-tree msti instance {cost cost | priority priority}

Parameters

msti instance	Enter the keyword `msti` and the MST instance number. The range is from zero (0) to 63.
cost cost	(OPTIONAL) Enter the keyword `cost` then the port cost value. The range is from 1 to 200000. The defaults are: 10-Gigabit Ethernet interface = 2000 Port Channel interface with one 10 Gigabit Ethernet = 2000 Port Channel with two 10 Gigabit Ethernet = 1800 Port Channel with two 100 Mbps Ethernet = 180000
priority priority	Enter keyword `priority` then a value in increments of 16 as the priority. The range is from 0 to 240. The default is 128.

Defaults

cost = depends on the interface type
priority = 128

Command Modes

INTERFACE

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.