Zu den Hauptinhalten

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

logging history

Specify which messages are logged to the history table of the switch and the SNMP network management station (if configured).

Syntax

logging history level

To return to the default values, use the no logging history command.

Parameters

level

Indicate a value from 0 to 7 or enter one of the following equivalent words: emergencies, alerts, critical, errors, warnings, notifications, informational, or debugging. The default is 4 or warnings.

Defaults

warnings or 4

Command Modes

CONFIGURATION

Supported Modes

Full–Switch Mode

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

When you configure the snmp-server trap-source command, the system messages logged to the history table are also sent to the SNMP network management station.

Related Commands

show logging — displays information logged to the history buffer.