Zu den Hauptinhalten

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

ip address dhcp

Acquire an IP address dynamically on an interface from the DHCP server.

Syntax

ip address dhcp [relay | vendor-class-identifier]

To disable DHCP Client on an interface, use the no ip address dhcp command.

Command Modes

INTERFACE

Supported Modes

All Modes

Default

Enabled

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
8.3.17.0	Supported on the M I/O Aggregator.

Usage Information

In the I/O Aggregator, the DHCP client is enabled only on the default VLAN and management interface 0/0. Use the ip address command to assign a static IP address that overwrites the dynamically assigned IP address.