Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

advertise dcbx-appln-tlv

On a DCBX port with a manual role, configure the application priority TLVs advertised on the interface to DCBX peers.

Syntax

advertise dcbx-appln-tlv {fcoe | iscsi}

To remove the application priority TLVs, use the no advertise dcbx-appln-tlv {fcoe | iscsi} command.

Parameters

{fcoe | iscsi}

Enter the application priority TLVs, where:

fcoe: enables the advertisement of FCoE in application priority TLVs.
iscsi: enables the advertisement of iSCSI in application priority TLVs.

Defaults

Application priority TLVs are enabled to advertise FCoE and iSCSI.

Command Modes

PROTOCOL LLDP

Supported Modes

Programmable-Mux (PMUX)

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
9.2(0.0)	Introduced on the M I/O Aggregator.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

To disable TLV transmission, use the no form of the command; for example, no advertise dcbx-appln-tlv iscsi.