Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

bandwidth-percentage

Assign a percentage of weight to the class/queue.

Syntax

bandwidth-percentage percentage

To remove the bandwidth percentage, use the no bandwidth-percentage command.

Parameters

percentage

Enter the percentage assignment of weight to the class/queue. The range is from 1 to 100% (granularity 1%).

Defaults

none

Command Modes

CONFIGURATION (conf-qos-policy-out)

Supported Modes

Programmable-Mux (PMUX)

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
9.2(0.0)	Introduced on the M I/O Aggregator.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

The unit of bandwidth percentage is 1%. A bandwidth percentage of 0 is allowed and disables the scheduling of that class. If the sum of the bandwidth percentages given to all eight classes exceeds 100%, the bandwidth percentage automatically scales down to 100%.

Related Commands

qos-policy-output — creates a QoS output policy.