Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show vlt private-vlan

Display the association of private VLAN (PVLAN) with the VLT LAG. You can configure VLT peer nodes in a PVLAN on the switch.

Syntax

show vlt private-vlan

Command Modes

EXEC

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.3(0.0)	Introduced on the MXL 10/40GbE Switch IO Module platform.

Usage Information

If you add an ICL or VLTi link as a member of a primary VLAN, the ICL becomes a part of the primary VLAN and its associated secondary VLANs, similar to the behavior for normal trunk ports. VLAN symmetricity is not validated if you associate an ICL to a PVLAN. Similarly, if you dissociate an ICL from a PVLAN, although the PVLAN symmetrictiy exists, ICL is removed from that PVLAN in such a case. The ICL Status field denotes the type of the VLAN port of the VLTi link configured in a PVLAN.

Example

Dell#Show vlt private-vlan vlan-id
                                             
                                             Codes: C- Community, I – Isolated, V – Internally tagged, T – tagged, * - VLT Pvlan
                                             Primary	Secondary	ICL Status
                                             10				        V (*)
                                             		    20(C)	    V
                                             		    30 (I)	  V
                                             
                                             40				        T
                                             		    50(C)	    T
                                             		    60 (I)	  T
                                             
                                             
                                             Dell#