Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

redistribute bgp

Redistribute BGP routing information throughout the OSPF instance.

Syntax

redistribute bgp as number [metric metric-value] | [metric-type type-value] | [tag tag-value]

To disable redistribution, use the no redistribute bgp as number [metric metric-value] | [metric-type type-value] [tag tag-value] command.

Parameters

as number	Enter the autonomous system number. The range is from 1 to 65535.
metric metric-value	(OPTIONAL) Enter the keyword `metric` then the metric-value number. The range is from 0 to16777214.
metric-type type-value	(OPTIONAL) Enter the keywords `metric-type` then one of the following: 1 = for OSPF External type 1 2 = for OSPF External type 2
tag tag-value	(OPTIONAL) Enter the keyword `tag` to set the tag for routes redistributed into OSPF. The range is from 0 to 4294967295.

Defaults

none

Command Modes

ROUTER OSPF

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.