Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show frrp

Display the resilient ring protocol configuration.

Syntax show frrp [ ring-id [summary]] | [summary]
Parameters
ring-id Enter the ring identification number. The range is from 1 to 255
summary (OPTIONAL) Enter the keyword summary to view just a summarized version of the Ring configuration.
Defaults none
Command Modes EXEC
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information Executing this command without the optional ring-id command clears the statistics counters on all the available rings. The system requires a command line confirmation before the command executes. This command clears the following counters:
  • hello Rx and Tx counters
  • Topology change Rx and Tx counters
  • The number of state change counters
Example (Summary) Dell#show frrp summary
Ring-ID State Mode  Ctrl_Vlan Member_Vlans
                                             ----------------------------------------------
                                             2       UP   Master   2        11-20, 25,27-30
                                             31      UP   Transit  31       40-41
                                             50      Down Transit  50       32
                                             Dell#
                                          
Example (1)
Dell#show frrp 1
                                             Ring protocol 1 is in Master mode
                                             Ring Protocol Interface:
                                             Primary : TenGigabitEthernet 0/6 State: Forwarding
                                             Secondary: Port-channel 100 State: Blocking
                                             Control Vlan: 1
                                             Ring protocol Timers: Hello-Interval 50 msec Dead-Interval 150 msec
                                             Ring Master's MAC Address is 00:01:e8:13:a3:19
                                             Topology Change Statistics: Tx:110 Rx:45
                                             Hello Statistics: Tx:13028 Rx:12348
                                             Number of state Changes: 34
                                             Member Vlans: 1000-1009
                                             Dell#
                                          
Example (2 Summary)
Dell#show frrp 2 summary
                                             Ring-ID State Mode  Ctrl_Vlan Member_Vlans
                                             -----------------------------------------------
                                             2       Up    Master 2        11-20, 25, 27-30
                                             Dell#
                                          
Related Commands protocol frrp — enters the resilient ring protocol and designate a ring identification.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\