Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show config

Display the non-default values in the current OSPF configuration.

Syntax

show config

Command Modes

ROUTER OSPF

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the M I/O Aggregator.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Example

Dell(conf-router_ospf)#show config
                                             !
                                             router ospf 3
                                             passive-interface FastEthernet 0/1
                                             Dell(conf-router_ospf)#