Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

clear pfc counters

Clear the PFC TLV counters and PFC statistics on an interface or stack unit.

Syntax

clear pfc counters [port-type slot/port [statistics]]| [stack-unit {unit-number | all} stack-ports all]

Parameters

port-type	Enter the keywords `port-type` then the slot/port information.
stack-unit unit number	Enter the keywords `stack-unit` then the stack-unit number to clear. The range is from 0 to 5.
all stack-ports all	Enter the keywords `all stack-ports all` to clear the counters on all interfaces.
statistics	Enter the keyword `statistics` to clear only the hardware PFC counters.

Defaults

None

Command Modes

EXEC Privilege

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
9.2(0.0)	Introduced on the M I/O Aggregator.

Usage information

If you do not use the statistics parameter, both hardware and DCBx counters clear.