Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show interfaces stack-unit

Display information on all interfaces on a specific Aggregator stack member.

Syntax

show interfaces stack-unit unit-number

Parameters

unit-number

Enter the stack member number (0 to 5).

Command Modes

EXEC
EXEC Privilege

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
8.3.17.0	Supported on the M I/O Aggregator.

Example

Dell#show interfaces stack-unit 0
                                             TenGigabitEthernet 0/1 is down, line protocol is down
                                             Hardware is DellForce10Eth, address is 00:1e:c9:f1:00:05
                                             Current address is 00:1e:c9:f1:00:05
                                             Server Port AdminState is Down
                                             Pluggable media not present
                                             Interface index is 34148609
                                             Internet address is not set
                                             Mode of IP Address Assignment : NONE
                                             DHCP Client-ID :tenG130001ec9f10005
                                             MTU 1554 bytes, IP MTU 1500 bytes
                                             LineSpeed auto
                                             Flowcontrol rx off tx off
                                             ARP type: ARPA, ARP Timeout 04:00:00
                                             Last clearing of "show interface" counters 5d5h24m
                                             Queueing strategy: fifo
                                             Input Statistics:
                                             0 packets, 0 bytes
                                             0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
                                             0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts
                                             0 Multicasts, 0 Broadcasts
                                             0 runts, 0 giants, 0 throttles
                                             0 CRC, 0 overrun, 0 discarded
                                             Output Statistics:
                                             0 packets, 0 bytes, 0 underruns
                                             0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
                                             0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts
                                             0 Multicasts, 0 Broadcasts, 0 Unicasts
                                             0 throttles, 0 discarded, 0 collisions
                                             Rate info (interval 299 seconds):
                                             Input 00.00 Mbits/sec, 0 packets/sec, 0.00% of line-rate
                                             Output 00.00 Mbits/sec, 0 packets/sec, 0.00% of line-rate
                                             Time since last interface status change: 5d5h23m
                                             !-------------output truncated ----------------!

Related Commands

show diag — Displays data plane and management plane input/output statistics.