Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show lacp

Displays the LACP matrix.

Syntax

show lacp port-channel-number [sys-id | counters]

Parameters

port-channel-number	Enter a port-channel number: The range is from 1 to 128.
sys-id	(OPTIONAL) Enter the keywords `sys-id` and the value that identifies a system.
counters	(OPTIONAL) Enter the keyword `counters` to display the LACP counters.

Command Modes

EXEC
EXEC Privilege

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
8.3.17.0	Supported on the M I/O Aggregator.

Example (Port-Channel-Number)

Dell#show lacp 128
                                             Port-channel 1 admin up, oper up, mode lacp
                                             Actor   System ID:Priority 32768, Address 0001.e800.a12b
                                             Partner System ID:Priority 32768, Address 0001.e801.45a5
                                             Actor Admin Key 1, Oper Key 1, Partner Oper Key 1
                                             LACP LAG 1 is an aggregatable link
                                             
                                             A-Active LACP, B-Passive LACP, C-Short Timeout, D-Long Timeout
                                             E-Aggregatable Link, F-Individual Link, G-IN_SYNC, H-OUT_OF_SYNC
                                             I-Collection enabled, J-Collection disabled, K-Distribution enabled L-Distribution disabled,
                                             M-Partner Defaulted, N-Partner Non-defaulted, O-Receiver is in expired state,
                                             P-Receiver is not in expired state
                                             
                                             Port Te 0/1 is enabled, LACP is enabled and mode is lacp
                                             Actor   Admin: State ACEHJLMP Key 1    Priority 128
                                             Oper: State ACEGIKNP Key 1    Priority 128
                                             Partner Admin: State BDFHJLMP Key 0    Priority 0
                                             Oper: State BCEGIKNP Key 1    Priority 128
                                             Dell#

Example (Sys-id)

Dell#show lacp 1 sys-id
                                             Actor    System ID: Priority 32768, Address 0001.e800.a12b
                                             Partner  System ID: Priority 32768, Address 0001.e801.45a5
                                             
                                             Dell#

Example (Counter)

Dell#show lacp 1 counters
                                             ----------------------------------------------------
                                             LACP PDU    Marker PDU   Unknown   Illegal
                                             Port     Xmit   Recv   Xmit Recv      Pkts Rx   Pkts Rx
                                             -----------------------------------------------------
                                             TenGig 0/1  200  200     0    0        0          0
                                             Dell#

Related Commands

clear lacp counters — Clears the LACP counters.

show interfaces port-channel — Displays the information on configured Port Channel groups.