Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show fip-snooping fcf

Displays information on the FCFs in FIP-snooped sessions, including the FCF interface and MAC address, FCF interface, VLAN ID, FC-MAP value, FKA advertisement period, and number of ENodes connected.

Syntax

show fip-snooping fcf[fcf-mac-address]

Parameters

fcf-mac-address

Enter the MAC address of the FCF to be displayed.

Command Modes

EXEC
EXEC Privilege

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
8.3.17.0	Supported on the M I/O Aggregator.

Usage Information

The following table describes the show fip-snooping fcf command.

Field	Description
FCF MAC	MAC address of the FCF
FCF Interface	Slot/ port number of the interface to which the FCF is connected.
VLAN	VLAN ID number used by the session
FC-MAP	FC-MAP value advertised by the FCF.
FKA_ADV_PERIOD	Period of time (in milliseconds) during which FIP keep-alive advertisements are transmitted.
No of ENodes	Number of ENodes connected to the FCF

Example

Dell# show fip-snooping fcf
                                             FCF MAC             FCF Interface    VLAN    FC-MAP    FKA_ADV_PERIOD  No. of Enodes
                                             -------             -------------    ----     ------    --------------  -------------
                                             54:7f:ee:37:34:40    Po 128           100     0e:fc:00     4000              1