Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show vrrp ipv6

View the IPv6 VRRP groups that are active. If no VRRP groups are active, the system returns No Active VRRP group.

Syntax

show vrrp ipv6 [ vrid] [ interface] [brief]

Parameters

vrid	(OPTIONAL) Enter the virtual router identifier for the VRRP group to view only that group. The range is from 1 to 255.
interface	Enter the following keywords and slot/port or number information: For a Port Channel interface, enter the keywords `port-channel` then a number. The range is from 1 to 128. For SONET interfaces, enter the keyword `sonet` then the slot/port information. For a 10-Gigabit Ethernet interface, enter the keyword `TenGigabitEthernet` then the slot/port information. For a VLAN interface, enter the keyword `vlan` then the VLAN ID. The VLAN ID range is from 1 to 4094.
brief	(OPTIONAL) Enter the keyword `brief` to view a table of information on the VRRP groups.

Command Modes

EXEC
EXEC Privilege

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

The following describes the show vrrp ipv6 command shown in the following example.

Line Beginning with	Description
GigabitEthernet...	Displays the Interface, the VRRP group ID, and the network address. If the interface is no sending VRRP packets, 0.0.0.0 appears as the network address.
State: master...	Displays the interface’s state: Na/If (not available). master (MASTER virtual router). backup (BACKUP virtual router). the interface’s priority and the IP address of the MASTER.
Hold Down:...	This line displays additional VRRP configuration information: Hold Down displays the hold down timer interval in seconds. Preempt displays TRUE if preempt is configured and FALSE if preempt is not configured. AdvInt displays the Advertise Interval in seconds.
Adv rcvd:...	This line displays counters for the following: Adv rcvd displays the number of VRRP advertisements received on the interface. Adv sent displays the number of VRRP advertisements sent on the interface. Bad pkts rcvd displays the number of invalid packets received on the interface.
Virtual MAC address	Displays the virtual MAC address of the VRRP group.
Virtual IP address	Displays the virtual IP address of the VRRP router to which the interface is connected.
Tracking states...	Displays information on the tracked interfaces or objects configured for a VRRP group ( `track` command), including: UP or DOWN state of the tracked interface or object (Up or Dn). Interface type and slot/port or object number, description, and time since the last change in the state of the tracked object. Cost to be subtracted from the VRRP group priority if the state of the tracked interface/object goes DOWN.

Example

Dell#show vrrp ipv6
                                             ------------------
                                             GigabitEthernet 5/6, IPv6 VRID: 255, Version: 3, Net:
                                             fe80::201:e8ff:fe7a:6bb9
                                             State: Master, Priority: 101, Master: fe80::201:e8ff:fe7a:6bb9 (local)
                                             Hold Down: 0 centisec, Preempt: TRUE, AdvInt: 100 centisec
                                             Accept Mode: FALSE, Master AdvInt: 100 centisec
                                             Adv rcvd: 0, Bad pkts rcvd: 0, Adv sent: 64
                                             Virtual MAC address:
                                             00:00:5e:00:02:ff
                                             Virtual IP address:
                                             1::255 fe80::255