Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

graceful-restart t3

Configure the overall wait time before graceful restart completes.

Syntax

graceful-restart t3 {adjacency | manual} seconds

To return to the default, use the no graceful-restart t3 command.

Parameters

adjacency	Enter the keyword `adjacency` so that the restarting router receives the remaining time value from its peer and adjusts its T3 value so if you have configured this option.
manual	Enter the keyword `manual` to specify a time value that the restarting router uses. The range is from 50 to 120 seconds. The default is 30 seconds.

Defaults

manual, 30 seconds

Command Modes

ROUTER ISIS

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

The running router sets the remaining time value to the current adjacency hold time. You can override this setting by implementing this command.

Override the default restart-wait time by entering the no graceful-restart restart-wait command. When you disable restart-wait, the current adjacency hold time is used.

Set the t3 timer to adjacency on the restarting router when implementing this command. The restarting router gets the remaining time value from its peer and adjusts its T3 value so only when you have configured graceful-restart t3 adjacency.

Related Commands

graceful-restart restart-wait — enables the graceful restart maximum wait time before a restarting peer comes up.