Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show ip pim interface

View information on the interfaces with IP PIM enabled.

Syntax show ip pim interface
Command Modes
  • EXEC
  • EXEC Privilege
Supported Modes Full—Swtich
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The following describes the show ip pim interface command shown in the following example.
Field Description
Address Lists the IP addresses of the interfaces participating in PIM.
Interface List the interface type, with either slot/port information or ID (VLAN or Port Channel), of the interfaces participating in PIM.
Ver/Mode Displays the PIM version number and mode for each interface participating in PIM:
  • v2 = PIM version 2
  • S = PIM Sparse mode
Nbr Count Displays the number of PIM neighbors discovered over this interface.
Query Intvl Displays the query interval for Router Query messages on that interface (configured with ip pim query-interval command).
DR Prio Displays the Designated Router priority value configured on the interface (use the ip pim dr-priority command).
DR Displays the IP address of the Designated Router for that interface.
Example
E600-7-RPM0#show ip pim interface
                                             Address        Interface Ver/ Nbr   Query DR   DR
                                             Mode Count Intvl Prio
                                             172.21.200.254 te 0/5    v2/S 0     30 1  172.21.200.254
                                             172.60.1.2     te 0/1   v2/S 0     30 1  172.60.1.2
                                             192.3.1.1      te 1/8   v2/S 1     30 1  192.3.1.1
                                             192.4.1.1      te 1/8   v2/S 0     30 1  192.4.1.1
                                             172.21.110.1   te 1/6   v2/S 0     30 1  172.21.110.1
                                             172.21.203.1   te 1/7   v2/S 0     30 1  172.21.203.1
                                          

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\