Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show inventory

Display the switch type, components (including media), and Dell Networking OS version including hardware identification numbers and configured protocols.

Syntax show inventory [media slot]
Parameters
media slot (OPTIONAL) Enter the keyword media then the stack ID of the stack member you want to display pluggable media inventory.
Defaults none
Command Modes EXEC
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
Usage Information If there are no fiber ports in the unit, just the header under show inventory media displays. If there are fiber ports but no optics inserted, the output displays "Media not present or accessible".
Example
Dell#show inventory 
                                             System Type      : PE-FN-410S-IOA 
                                             System Mode      : 1.0       
                                             Software Version : 1-0(0-1859)
                                             
                                             Unit Type  Serial Number  Part Number  Rev  Piece Part ID  Rev  
                                             Svc Tag  Exprs Svc Code
                                             -----------------------------------------------
                                             * 0  PowerEdge-FN-410S-IOA  TW000000000020 07NVPVX01 X01  
                                             TW-07NVPV-00000-000-0020 X01  N/A      N/A 
                                             
                                             * - Management Unit 
                                             
                                             
                                             Software Protocol Configured 
                                             ------------------------------------------------
                                             DCBX 
                                             FIP Snooping 
                                             IGMP 
                                             iSCSI 
                                             LLDP 
                                             SNMP 
                                             Dell#
                                          
Example (media)
Dell#show inventory media ?
                                             <0-5>  Slot number       
                                             |      Pipe through a command 
                                             
                                             Dell#show inventory media 
                                             Slot Port  Type   Media       Serial Number  F10Qualified
                                             ------------------------------------------------------
                                             0    9     SFP+  10GBASE-SR     AHJ0BU3         Yes
                                             0    10    SFP+  10GBASE-CU5M   APF125100446U1  Yes
                                             0    11    SFP+  10GBASE-SR     CD23FM12H       Yes
                                             0    12    SFP+  10GBASE-SR     CD23FM0XT       Yes
                                             
                                             Dell#
                                          
Related Commands

show config (from INTERFACE VLAN mode) — displays information on a specific physical interface or virtual interface.


Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\