Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

logging monitor

Specify which messages are logged to Telnet applications.

Syntax

logging monitor [ level]

To disable logging to terminal connections, use the no logging monitor command.

Parameters

level

Indicate a value from 0 to 7 or enter one of the following parameters: emergencies, alerts, critical, errors, warnings, notifications, informational, or debugging. The default is 7 or debugging.

Defaults

7 or debugging

Command Modes

CONFIGURATION

Supported Modes

Full–Switch Mode

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Related Commands

default logging monitor — returns the logging monitor parameters to the default setting.