Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show processes cpu

Displays CPU usage information based on processes running.

Syntax

show processes cpu [management-unit 1-99 [details] | stack-unit 0–5 | summary ]

Parameters

management-unit 1-99 [details]	(OPTIONAL) Display processes running in the control processor. The `1-99` variable sets the number of tasks to display in order of the highest CPU usage in the past five (5) seconds. Add the keyword `details` to display all running processes (except sysdlp). Refer to Example (management-unit).
stack-unit 0–5	(OPTIONAL) Enter the keywords `stack-unit` then the stack member ID. The range is from 0 to 5. As an option of the `show processes cpu` command, this option displays CPU usage for the designated stack member. Or, as an option of `memory`, this option limits the output of memory statistics to the designated stack member. Refer to Example (stack-unit).
summary	(OPTIONAL) Enter the keyword `summary` to view a summary view CPU utilization of processes related to line card processing. Refer to Example (summary).

Command Modes

EXEC
EXEC Privilege

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.

Example (summary)

Dell#show processes cpu summary
                                             
                                             CPU utilization  5Sec    1Min    5Min
                                             ------------------------------------
                                             UNIT1            4%      3%      2%

Example (management-unit)

Dell#show processes cpu management-unit 5
                                             CPU utilization for five seconds:4%/0%; one minute:4%; five minutes:4%
                                             PID     Runtime(ms) Invoked uSecs  5Sec  1Min  5Min  TTY Process
                                             0x00000000  2120    212     10000  3.77% 3.77% 3.77% 0 system
                                             0x00000112  2472940 247294  10000  0.79% 0.61% 0.65% 0 sysdlp
                                             0x000000e4  495560  49556   10000  0.20% 0.25% 0.24% 0 sysd
                                             0x0000013d  34310   3431    10000  0.00% 0.02% 0.00% 0 lacp
                                             0x00000121  4190    419     10000  0.00% 0.02% 0.00% 0 iscsiOpt
                                             
                                             
                                             PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
                                             Dell#

Example (stack-unit)

Dell#show process cpu stack-unit 1
                                             CPU utilization for five seconds:4%/0%; one minute:3%; five minutes:2%
                                             PID     Runtime(ms) Invoked uSecs  5Sec  1Min  5Min TTY Process
                                             0x763a3000 17981680 1798168 10000  3.00% 2.67% 2.67% 0 KP
                                             0x762ba000 0        0       0      0.00% 0.00% 0.00% 0 debugagt
                                             0x762d9000 0        0       0      0.00% 0.00% 0.00% 0 F10StkMgr
                                             0x762f8000 214590   21459   10000  0.00% 0.00% 0.00% 0 lcMgr
                                             0x76319000 7890     789     10000  0.00% 0.00% 0.00% 0 dla
                                             0x76344000 155770   15577   10000  0.00% 0.00% 0.02% 0 sysAdmTsk
                                             0x76363000 583230   58323   10000  0.00% 0.00% 0.02% 0 timerMgr
                                             0x76381000 658850   65885   10000  0.00% 0.17% 0.08% 0 PM
                                             0x76299000 80110    8011    10000  0.00% 0.00% 0.00% 0 diagagt
                                             0x763c3000 0        0       0     0.00%  0.00% 0.00% 0 evagt
                                             --More--

Related Commands

show diag — displays the data plane or management plane input and output statistics of the designated component of the designated stack member.

show hardware system-flow — displays Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.

show interfaces stack-unit — displays information on all interfaces on a specific stack member.

show processes memory — displays CPU usage information based on running processes.